Hiya Rob,

I have been using BinkD normally for my FTN needs, but I thought I would have another crack
at using the new BinkiT functionality today.

I have configured it as per the wiki, And it seems to connect and Authenticate to my HUB at
ftn.sysgod.org (3:712/848).

I then send a test Areafix netmail to see if it sends pkt's ok and as before the packet just
remains in /sbbs/fido/outbound.

I do see an error now when I run exec/jsexec binkit -p manually. Something to do with
Encryption Required. Maybe I have missed something in the config?

See below.

-----------------------
Got M_NUL command args: LOC Sydney
Got M_NUL command args: PHN sysgod.org
Got M_NUL command args: NDL MO,CM,TCP,IFC,TEL,VMP,BND
Got M_NUL command args: TIME Fri, 30 Mar 2018 10:45:38 +1000
Got M_NUL command args: VER Argus/3.210/ binkp/1.0
Peer version: Argus/3.210/ binkp/1.0
Got M_ADR command args: 3:712/848@fidonet 3:712/0@fidonet 3:3/0@fidonet 115:6000/0@pascalnt 115:6000/1@pascalnt 115:6100/0@pascalnt 115:6100/1@pascalnt 115:6101/0@pascalnt 115:6101/1@pascalnt 169:1/125@battle 21:1/119@fsxnet
Sent M_PWD command args: CRAM-MD5-xxxxxxREMOVED FROM COPY/PASTE
Got M_OK command args:
Authentication successful:
Unconfigured address 3:712/0@fidonet
Unconfigured address 3:3/0@fidonet
Unconfigured address 115:6000/0@pascalnt
Unconfigured address 115:6000/1@pascalnt
Unconfigured address 115:6100/0@pascalnt
Unconfigured address 115:6100/1@pascalnt
Unconfigured address 115:6101/0@pascalnt
Unconfigured address 115:6101/1@pascalnt
Unconfigured address 169:1/125@battle
Unconfigured address 21:1/119@fsxnet
Adding outbound files for 3:712/848@fidonet
Adding '/sbbs/fido/outbound/02c80350.cut' as 'r4dpv31z.pkt'
Sent M_ERR command args: Encryption required
Unlocking /sbbs/fido/outbound/02c80350.bsy.
No flow files to be processed.
Done checking in /sbbs/fido/outbound/.
Running outbound dir /sbbs/fido/outbound.001/
Done checking in /sbbs/fido/outbound.001/.
Running outbound dir /usr/local/sbbs/fido/outbound/
No flow files to be processed.
Done checking in /usr/local/sbbs/fido/outbound/.
Running outbound dir /usr/local/sbbs/fido/outbound.001/
Done checking in /usr/local/sbbs/fido/outbound.001/.
Running polls
/sbbs/exec/binkit.js executed in 0.43 seconds

------------------------------------------------------------

Any thoughts???

Thx
Regards..Geo
ooooOOOOoooo

---
* Synchronet * The Dungeon BBS - Risen from the Ashes! - Canberra, Australia. http://bbs.barnab
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: BinkiT to Argus Hub
By: Geo to Digital Man on Fri Mar 30 2018 09:55 pm

Hiya Rob,

I have been using BinkD normally for my FTN needs, but I thought I would have another crack
at using the new BinkiT functionality today.

I have configured it as per the wiki, And it seems to connect and Authenticate to my HUB at
ftn.sysgod.org (3:712/848).

I then send a test Areafix netmail to see if it sends pkt's ok and as before the packet just
remains in /sbbs/fido/outbound.

I do see an error now when I run exec/jsexec binkit -p manually. Something to do with
Encryption Required. Maybe I have missed something in the config?

See below.

-----------------------
Got M_NUL command args: LOC Sydney
Got M_NUL command args: PHN sysgod.org
Got M_NUL command args: NDL MO,CM,TCP,IFC,TEL,VMP,BND
Got M_NUL command args: TIME Fri, 30 Mar 2018 10:45:38 +1000
Got M_NUL command args: VER Argus/3.210/ binkp/1.0
Peer version: Argus/3.210/ binkp/1.0
Got M_ADR command args: 3:712/848@fidonet 3:712/0@fidonet 3:3/0@fidonet 115:6000/0@pascalnt 115:6000/1@pascalnt 115:6100/0@pascalnt 115:6100/1@pascalnt 115:6101/0@pascalnt 115:6101/1@pascalnt 169:1/125@battle 21:1/119@fsxnet
Sent M_PWD command args: CRAM-MD5-xxxxxxREMOVED FROM COPY/PASTE
Got M_OK command args:
Authentication successful:
Unconfigured address 3:712/0@fidonet
Unconfigured address 3:3/0@fidonet
Unconfigured address 115:6000/0@pascalnt
Unconfigured address 115:6000/1@pascalnt
Unconfigured address 115:6100/0@pascalnt
Unconfigured address 115:6100/1@pascalnt
Unconfigured address 115:6101/0@pascalnt
Unconfigured address 115:6101/1@pascalnt
Unconfigured address 169:1/125@battle
Unconfigured address 21:1/119@fsxnet
Adding outbound files for 3:712/848@fidonet
Adding '/sbbs/fido/outbound/02c80350.cut' as 'r4dpv31z.pkt'
Sent M_ERR command args: Encryption required

Any thoughts???

The peer doesn't support encryption. You need to set "AllowUnecrypted=true" for that link in your binkit.ini file.

digital man

Synchronet "Real Fact" #95:
Synchronet v3.14a was released in December of 2006 (1 year after v3.13a). Norco, CA WX: 82.5oF, 35.0% humidity, 13 mph NE wind, 0.00 inches rain/24hrs --- SBBSecho 3.03-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: BinkiT to Argus Hub
By: Digital Man to Geo on Fri Mar 30 2018 15:46:39

Any thoughts???

The peer doesn't support encryption. You need to set "AllowUnecrypted=true" for that link in your binkit.ini file.

Thanks Rob tha fixed it 8-)

Now I have one other interesting thing. What is a .try packet?

I seem to have one in my outbound directory and the HUB is saying


Unsupported Flow file type



Thx


Sorry to have been bugging you so much this week after years of silence 8-)


Regards..Geo
ooooOOOOoooo
--- SBBSecho 3.03-Linux
* Origin: The Dungeon BBS-Canberra, Australia. (3:712/620)

Re: BinkiT to Argus Hub
By: Keith Matthews to Digital Man on Sat Mar 31 2018 10:43 am

Now I have one other interesting thing. What is a .try packet?

It's not a packet, just a control file. It's documented in this spec: http://ftsc.org/docs/fts-5005.003

I seem to have one in my outbound directory and the HUB is saying

It's likely left-over from previous mailer as BinkIT doesn't create/use them. You could just safely delete the *.try files.

digital man

Synchronet "Real Fact" #101:
Alternate and loadable font support was added to Synchronet in February 2018. Norco, CA WX: 78.9oF, 41.0% humidity, 12 mph NE wind, 0.00 inches rain/24hrs --- SBBSecho 3.03-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: BinkiT to Argus Hub
By: Digital Man to Keith Matthews on Fri Mar 30 2018 17:17:58

It's likely left-over from previous mailer as BinkIT doesn't create/use them. You could just safely delete the *.try files.
digital man

Thanks Rob


BinkiT seems to be all working very nicely 8-)

I have also set up TickiT, I ran it manually and it worked perfectly, So I will see how it goes automatically tommorow when I recv my next buch of files from the HUB. 8-)


Very Exciting 8-))


I can't wait to try and see if I can use the Areafix functions. 8-)



Regards..Geo
ooooOOOOoooo
--- SBBSecho 3.03-Linux
* Origin: The Dungeon BBS Canberra, Australia. (3:712/620)