I just testing tickit.js
I get this error:
2017-08-12 09:43:28 Packet password is empty, but TIC has a password
I dont have a Packet password for mail because it not working for me.
I tried with keyword "IgnorePassword" but it dont working.
Is it any workaround for this?
Would be nice with a "Password=xxx" keyword in tickit.ini

*Fidde*



---
* Synchronet * Pepzi - Pepzi.se 500/100 Mbits
* Origin: Vertrauen - vert.synchro.net (1:103/705)

Re: tickit
By: Fidde to Digital Man on Sat Aug 12 2017 10:30 am

I just testing tickit.js
I get this error:
2017-08-12 09:43:28 Packet password is empty, but TIC has a password

Is it an error or just a warning?

I dont have a Packet password for mail because it not working for me.

Perhaps you should get that fixed.

I tried with keyword "IgnorePassword" but it dont working.
Is it any workaround for this?
Would be nice with a "Password=xxx" keyword in tickit.ini

Sure. I didn't write tickit.js nor have I used it.

digital man

Synchronet/BBS Terminology Definition #47:
SpiderMonkey = Mozilla's C/C++ JavaScript Engine (libmozjs)
Norco, CA WX: 66.7oF, 85.0% humidity, 0 mph S wind, 0.00 inches rain/24hrs
--- SBBSecho 3.01-Win32
* Origin: Vertrauen - vert.synchro.net (1:103/705)

Hej Digital,

2017-08-12 02:41, Digital Man wrote to Fidde:

I just testing tickit.js
I get this error:
2017-08-12 09:43:28 Packet password is empty, but TIC has a password

Is it an error or just a warning?

It was a warning, but the files not processing.

I dont have a Packet password for mail because it not working for me.

Perhaps you should get that fixed.

Yes, working for sending mail, but when receiving it say wrong password,
I dont why.

I tried with keyword "IgnorePassword" but it dont working.
Is it any workaround for this?
Would be nice with a "Password=xxx" keyword in tickit.ini

Sure. I didn't write tickit.js nor have I used it.

ok, sorry for that

@H@Ydigital man@n

---
* Synchronet * Pepzi - Pepzi.se 500/100 Mbits
* Origin: Vertrauen - vert.synchro.net (1:103/705)

On 2017 Aug 12 12:29:44, you wrote to Digital Man:

I dont have a Packet password for mail because it not working for me.

Perhaps you should get that fixed.

Yes, working for sending mail, but when receiving it say wrong
password, I dont why.

case may be important... generally speaking, PKT passwords are all uppercase...
they can be a maximum of 8 characters long... the binary PKT header just cannot
carry longer passwords... most tossers force upper case on them... you should be able to look at a PKT in its original state and see what password is in it...

)\/(ark

Always Mount a Scratch Monkey
Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
... How does the snowplow driver get to work???
---
* Origin: (1:3634/12.73)

Re: Re: tickit
By: Fidde to Digital Man on Sat Aug 12 2017 12:29 pm

Hej Digital,

2017-08-12 02:41, Digital Man wrote to Fidde:

I just testing tickit.js
I get this error:
2017-08-12 09:43:28 Packet password is empty, but TIC has a password

Is it an error or just a warning?

It was a warning, but the files not processing.

I dont have a Packet password for mail because it not working for me.

Perhaps you should get that fixed.

Yes, working for sending mail, but when receiving it say wrong password,
I dont why.

What is "it" in that sentence, SBBSecho? Do you have a log snippet and an example packet?

digital man

Synchronet/BBS Terminology Definition #37:
NUP = New User Password
Norco, CA WX: 90.7oF, 43.0% humidity, 6 mph SE wind, 0.00 inches rain/24hrs
--- SBBSecho 3.01-Win32
* Origin: Vertrauen - vert.synchro.net (1:103/705)

Hello Fidde,

On Sat Aug 12 2017 10:30:26, Fidde wrote to Digital Man:

I just testing tickit.js
I get this error:
2017-08-12 09:43:28 Packet password is empty, but TIC has a password
I dont have a Packet password for mail because it not working for me.
I tried with keyword "IgnorePassword" but it dont working.
Is it any workaround for this?
Would be nice with a "Password=xxx" keyword in tickit.ini

With tickit.js (and as far as I know, this is the *only* file processor built this way), it is a requirement that the TIC password matches the packet password. You can not have one or the other. You must use both.

So if you want to use a TIC password, you need to setup a packet password with your hub as well, and make them the same password. Otherwise, getting rid of the TIC password and _not_ having a packet password would also work.

Regards,
Nick

... "-Y-| -+-+-#-A. -> -+-|-|-U-i -e-+-+-i-|-+ -C-#-#-+-e-#-A."
--- GoldED+/LNX 1.1.5-b20170303
# Origin: thePharcyde_ distribution system (Wisconsin) (723:1/1)
* Synchronet * thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin)
* Origin: Vertrauen - vert.synchro.net (1:103/705)

I just testing tickit.js
I get this error:
2017-08-12 09:43:28 Packet password is empty, but TIC has a

password

Is it an error or just a warning?

It was a warning, but the files not processing.

I dont have a Packet password for mail because it not working for

me.

Perhaps you should get that fixed.

Yes, working for sending mail, but when receiving it say wrong
password, I dont why.

What is "it" in that sentence, SBBSecho? Do you have a log snippet and an example packet?

I have get all working now, so now i am happy :)

@H@Ydigital man@n

Fidde


---
* Synchronet * Pepzi - Pepzi.se 500/100 Mbits
* Origin: Vertrauen - vert.synchro.net (1:103/705)

2017-08-12 09:43:28 Packet password is empty, but TIC has a
password I dont have a Packet password for mail because it not
working for me. I tried with keyword "IgnorePassword" but it dont
working. Is it any workaround for this? Would be nice with a
"Password=xxx" keyword in tickit.ini

With tickit.js (and as far as I know, this is the *only* file processor built this way), it is a requirement that the TIC password matches the packet password. You can not have one or the other. You must use both.

So if you want to use a TIC password, you need to setup a packet password with your hub as well, and make them the same password. Otherwise, getting rid of the TIC password and _not_ having a packet password would also
work.

I understand that, have setup same password now and all working fine now.

Regards,
Nick

/Fidde

---
* Synchronet * Pepzi - Pepzi.se 500/100 Mbits
* Origin: Vertrauen - vert.synchro.net (1:103/705)

well im takeing a little break from working on my linux system to work on my win sync bbs so im setting up tickit and binkit i will get to binkit later
but on win whats a better settup for tickit PATH or DIR im looking for the
pros and cons on both thanks

Terry

CSCNet
1:128/187
http://cscnet1.net

---
* Synchronet * Colorado Springs Central Net - cscnet1.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: tickit
By: Terry to All on Mon Jan 29 2018 03:18 pm

well im takeing a little break from working on my linux system to work on my win sync bbs so im setting up tickit and binkit i will get to binkit later but on win whats a better settup for tickit PATH or DIR im looking for the pros and cons on both thanks

In my tickit.ini I only use Dir= and Links= and that works well for me. I have never used Path=, at least not yet.

Ttyl :-),
Al


... Reality is for those who can't handle computers.

---
* Synchronet * The Rusty MailBox - Penticton, BC Canada - trmb.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: tickit
By: Terry to All on Mon Jan 29 2018 03:18 pm

well im takeing a little break from working on my linux system to

work

on my win sync bbs so im setting up tickit and binkit i will get to binkit later but on win whats a better settup for tickit PATH or

DIR im

looking for the pros and cons on both thanks

In my tickit.ini I only use Dir= and Links= and that works well for me.

I

have never used Path=, at least not yet.

Ttyl :-),
Al

... Reality is for those who can't handle computers.

---
* Synchronet * The Rusty MailBox - Penticton, BC Canada -

trmb.synchro.net

Hi

Thanks for the reply ok i will try DIR on this system i used Path on the
linux one so i will see how they both work but as for the "LINK=" line is
that just for my downlinks or do i need to put my uplink in there as well
so basicly if i don't send an area to anyone if im not a hub do i even
need the "LINK=" line thanks?

Terry

---
* Synchronet * Colorado Springs Central Net - cscnet1.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Re: tickit
By: Terry to Al on Wed Jan 31 2018 03:28 pm

Thanks for the reply ok i will try DIR on this system i used Path on the linux one so i will see how they both work but as for the "LINK=" line is that just for my downlinks or do i need to put my uplink in there as well so basicly if i don't send an area to anyone if im not a hub do i even need the "LINK=" line thanks?

You only need the Links= line if you want to send files you receive out to other nodes along with tics. You don't need to add your uplink.

Ttyl :-),
Al


... Sir, the Romulans do not take prisoners!

---
* Synchronet * The Rusty MailBox - Penticton, BC Canada - trmb.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Hi

OK well i somewhat got tickit working on my linux system i still can't get
it to do areafixes so if someone can help me with that one that would be
great i tryed to send a areafix to it like it said in the wiki page on
setting it up but it came back with a msg saying that the sare wasn't there
but i know it was so something it still not quite right but it is tossing
files and sending files out for the most part so i moved on to my win sbbs system so i set it up a little diff then the linux one i used paths on the linux tickit.ini and in the windows one i used DIR but when i run jsexec tickit.js it does nothing all i get is this

-------
E:\sbbs\exec>jsexec.exe tickit.js

JSexec v3.17a-Win32 (rev 1.194) - Execute Synchronet JavaScript Module
Compiled Feb 16 2018 05:03:27 with MSC 1800

Loading configuration files from E:\sbbs\ctrl
JavaScript-C 1.8.5 2011-03-31
JavaScript: Creating runtime: 8388608 bytes
JavaScript: Initializing context (stack: 16384 bytes)

Reading script from E:\sbbs\exec\tickit.js
E:\sbbs\exec\tickit.js compiled in 0.00 seconds
E:\sbbs\exec\tickit.js executed in 0.67 seconds

JavaScript: Destroying context
JavaScript: Destroying runtime

E:\sbbs\exec>
------------------
and thats all it does and thats on the win32 ver i have a LOT of tic files
in my inbound dir to toss and i have checked all the path in scfg and
echocfg and all looks right so what could be worng thanks

Terry

---
* Synchronet * Colorado Springs Central Net - cscnet1.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: tickit
By: Terry to All on Mon Feb 19 2018 03:36 pm

and thats all it does and thats on the win32 ver i have a LOT of tic files in my inbound dir to toss and i have checked all the path in scfg and echocfg and all looks right so what could be worng thanks

I would try running tickit.js with jsexec but I have no inbound tics at thew moment to try it on.

I run tickit from a timed event and it works well for me here.

Have you checked the wiki?

http://wiki.synchro.net/util:tickit

Here's a sample of my ctrl/tickit.ini

[NODELIST]
Dir=FIDO-NODELIST

Ttyl :-),
Al


... It can be a dangerous place...

---
* Synchronet * The Rusty MailBox - Penticton, BC Canada - trmb.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: tickit
By: Terry to All on Mon Feb 19 2018 03:36 pm

and thats all it does and thats on the win32 ver i have a LOT of

tic

files in my inbound dir to toss and i have checked all the path in

scfg

and echocfg and all looks right so what could be worng thanks

I would try running tickit.js with jsexec but I have no inbound tics at

thew

moment to try it on.

I run tickit from a timed event and it works well for me here.

Have you checked the wiki?

http://wiki.synchro.net/util:tickit

Here's a sample of my ctrl/tickit.ini

[NODELIST]
Dir=FIDO-NODELIST

Ttyl :-),
Al

... It can be a dangerous place...

---
* Synchronet * The Rusty MailBox - Penticton, BC Canada -

trmb.synchro.net

HI

Thanks for the reply i run tickit as a timed even and even tryed it by hand
i run it like this

jsexec tickit.js

and it does nothing as far as toss anything it says it ran but thats it it
says what ini file it uses but tosses nothing i use it on my linux sbbs
system and it works fine it toss like it should the only prob with the
linux one is i can't figure out how to get it to do areafixes but it tosses
the only diff is on the linux one i use PATH= and on win i use DIR= but i
tryed 3 or 4 areas on the win ver with DIR= thinking maybe that was it but
it still didn't work?

Thanks
Terry

---
* Synchronet * Colorado Springs Central Net - cscnet1.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Re: tickit
By: Terry to Al on Wed Feb 21 2018 10:13 am

and it does nothing as far as toss anything it says it ran but thats it it says what ini file it uses but tosses nothing i use it on my linux sbbs system and it works fine it toss like it should the only prob with the linux one is i can't figure out how to get it to do areafixes but it tosses the only diff is on the linux one i use PATH= and on win i use DIR= but i tryed 3 or 4 areas on the win ver with DIR= thinking maybe that was it but it still didn't work?

Tickit will do nothing if it can't figure out what to do. It will leave the files and tics in your inbound.

I've seen that here.. :)

I only have experience on linux and on my machine it logs the output in /var/log/messages or on the console if not daemonized. There must be a similar log or console output on windows but I'm not sure where it is.

I've never used Path= here but looking at tickit.ini it looks like files will be moved there but of course not imported into the BBS so if you want those files imported to the BBS use Dir=.

I don't think (but I could be wrong) tickit has a filefix feature so you'll need to add nodes that you want to send those files on to yourself. Nodes can change their tic password with areafix but not add areas remotely.

[NODELIST]
Dir=FIDO-NODELIST
Links=1:11/111

Ttyl :-),
Al


... Should I or shouldn't I?... Too late, I did!

---
* Synchronet * The Rusty MailBox - Penticton, BC Canada - trmb.synchro.net
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)