I have a Debian 9 netbook here. Because I have an unusual setup here, I need to use manual IP address configuration. I used the default network manager to setup the static IPv4 and IPv6 addresses on the wifi
interface. When I start the system, all works fine, and the correct IPs and routing information as I setup via the GUI are in place.
However, when there's a network upset (most probably due to the router rebooting, or some other wifi disturbance), the static IPs are gone and are replaced by a DHCP assigned IPv4 address. This causes a number of issues, breaking connectivity with the BBS that is running on the
system.
In the good old days, I'd have done a total manual configuration, and
this would have stuck, but I decided to use the tools provided for 2 reasons:
1. To work with the new ways of doing things, rather than figting the system.
2. To simplify the configuration of the wifi (i.e. not having to mess around with wpa-supplicant directly).
Anyone seen this behaviour? And better still, anyone have a solution?
On 05-29-19 21:39, andrew clarke wrote to Tony Langdon <=-
Have you considered assigning the netbook a static IP address using
DHCP?
| Sysop: | Winzlo |
|---|---|
| Location: | Minnesota, USA |
| Users: | 11 |
| Nodes: | 16 (0 / 16) |
| Uptime: | 495937:43:02 |
| Calls: | 82 |
| Files: | 1,070 |
| D/L today: |
27 files (11,920K bytes) |
| Messages: | 286,957 |